The **Click position** building block clicks an exact position on the screen using **X, Y** coordinates. It is commonly used together with blocks that _find_ something on screen and output a position (for example [Find image](https://docs.leapwork.com/leapwork-flow/latest/building-blocks/image-and-text-recognition/find-image), [Get text](https://docs.leapwork.com/leapwork-flow/latest/building-blocks/image-and-text-recognition/get-text), or [Get number](https://docs.leapwork.com/leapwork-flow/latest/building-blocks/image-and-text-recognition/get-number)), so you can click exactly where the target was detected.

Fully expanded, the **Click position** block shows the following properties:

**Note:** The screenshot on this page uses the **Elegance Design**, introduced in **2025.3**. If you are using an earlier version, your layout may look different.

## Quick-start

1. Drag **Click position** onto the canvas.
2. Connect the block in the flow and specify **Position**, **Button**, and (if needed) **Speed** and **Await no movement** settings.
3. Run the flow when it’s ready.

## Building block parameters

### Parameters

- **Block header**: The green input connector triggers the block to start executing. The green output connector triggers when the click has been performed. You can rename the block title by double-clicking the header text.

- **Position**: Specifies the screen position to click using **X, Y** coordinates. The top-left corner of the screen is **0, 0**. Use the expander to work with X and Y separately.

- **Button**: Selects which mouse button to use and whether to perform a single or double click.
  - **Left**: Click with the left mouse button.
  - **Right**: Click with the right mouse button.
  - **Middle**: Click with the middle mouse button.
  - **Double Left**: Double-click with the left mouse button.
  - **Double Right**: Double-click with the right mouse button.
  - **Double Middle**: Double-click with the middle mouse button.
- **Hold Duration (sec)**: Holds the left mouse button down at the selected position for the specified duration (in seconds), then releases it automatically. The default value is **0 seconds**, and the supported range is **0 to 10 seconds**. This field is only shown when **Button** is set to **Left**.

- **Speed**: Controls the mouse movement speed. **Medium** is the default and is generally recommended because it replays well on video. **Instantaneous** repositions the mouse without visible movement.

- **Await no movement**: When selected, the block waits until there has been no movement on the screen for a specified period before clicking. This is useful when waiting for screen updates (for example a page load). Regardless of this setting, the click will occur after waiting a maximum of **30 seconds**.

- **Timeout (sec)**: The number of seconds the screen must have had no movement before the click proceeds (used with **Await no movement**).

## Resources

| **Topic** | **Description** |
| --- | --- |
| [Flows FAQ](https://docs.leapwork.com/faq/latest/leapwork-flow-faq/flows-faq) | Common questions about creating, running, and managing flows in Leapwork. |
| [Flows Troubleshooting](https://docs.leapwork.com/troubleshooting/latest/leapwork-flow-troubleshooting/flows-troubleshooting) | Guidelines and solutions for identifying and fixing issues that occur when building or running flows in Leapwork.