Mobile Configuration | Leapwork Docs

Once a connection is established, the Mobile Configurations tab allows administrators to add and manage mobile devices (phones, tablets, etc.) for automation.

Note: You must define a connection before adding any mobile devices. Only administrators can access Mobile Configuration settings.

Leapwork supports two mobile configuration types:

Note: If you're using an Appium server connection, ensure all devices are also registered on the Appium server before adding them to Leapwork.

iOS Device Configuration:

  1. In the Mobile Configurations tab, click Add.

  2. Enter a unique Title and a brief Description.

  3. Click Add next to Mobile to open the configuration form.

  4. Fill in the fields:

    1. Cloud connection: Select the desired connection.
    2. OS type: Choose the operating system.  This information is available on either the physical device or the HeadSpin device information.
    3. Device name: Enter a name for the device.
    4. Platform version: Specify the OS version. This information is available on either the physical device or the HeadSpin device information.
    5. UDID: Enter the device's UDID.
    6. XcodeOrgId and XcodeSigningId: Retrieve these from your Apple Developer account.
    7. Capturing type:
      • Screenshot: Captures screenshots per block. Recommended for most use cases.
      • Streaming: Captures full-frame video. Requires more bandwidth and storage.

  5. Click Test configuration to verify the setup.

  6. Click Apply to register the changes.

  7. Click Save.

A confirmation message appears and the new configuration is listed under Mobile.

Android Device Configuration

  1. Open the Mobile Configurations tab and click Add.

  2. Provide a unique Title and a short Description.

  3. Click Add next to Mobile to open the configuration form.

  4. Fill in the fields:

    1. Cloud connection: Select the desired connection.
    2. OS type: Choose the operating system.  This information is available on either the physical device or the HeadSpin device information.
    3. Device name: Enter a name for the device.
    4. Platform version: Specify the OS version. This information is available on either the physical device or the HeadSpin device information.
    5. UDID: Use the command adb devices in the terminal to retrieve it.
    6. Capturing type:
      • Screenshot: Captures screenshots by block. Recommended for most cases.
      • Streaming: Captures full-frame video. Requires more bandwidth and storage.

  5. Click Test configuration to verify the setup.

  6. Click Apply to register the changes.

  7. Click Save.

A confirmation message appears and the new configuration is listed under Mobile.

To edit or delete a configuration, use the Edit or Delete buttons beside the mobile device entry.